Brand:咸陽泰思特

Origin:China Shanxi

Model:PL11

MOQ:1Sets

Supply Time:Week

Product detail: PL11 PFI Beater(PFI Mill)  it is uses in the pulping papermaking experiment, for the paper pulp buckle Xie Du determination, the paper pulp test specimen moisture content's determination, the paper pulp density's determination, the wet degree of dissociation's determination, the degree of ionization determination provides the standard specimen, the PL11 refiner conforms to ISO 5264/2-1979 "the paper pulp laboratory beating - - second part: PFI bothers the experiment standard which" as well as ISO5264/2, TAPPIT248 stipulated.

 

Principle: Has the normal concentration paper pulp after the measurement to put between the knife roll and the smooth beating cylinder, knife roll and beating cylinder by different circumferential velociy revolving. By this function in the paper pulp, achieves the beating the goal.

 

Characteristic: Adjustable internode fly cutter and stuff chest intermural crack; Three group of beating pressure combination; The manual cutter head high and low work, the operational safety, the clean is convenient; Rotation or time automatic control control, high luminance numerical code demonstration; The rigid nose, the long time use, knocks on the solution gap to be accurate. The casting foundation, the revolution is steady, does not have the noise.

 

  Parameter:

  1. Stuff Chest: Inside diameter: φ250mm deep 53mm, rotational speed: 11.8r/s

  2. Fly Cutter Rotor: Outer diameter: φ200mm highly 50mm knife thick 5mm, rotational speed: 1440r/m.

  3. Fly Cutter Rotor Electrical Machinery: 1.1kW /380v; 24.3r/s.

  4. Buckles the Solution Gap Adjustment Distance: 0~25mm.

  5. Stuff Chest Electrical Machinery: 370W/380v; 1440r/m

  6. Counter Display Control Scope: 0-999999 revolutions

  7.Kknife Roll and Stuff Chest Link Speed Difference: (6.0±0.2) m/s.

  8. Buckles the Solution Paper Pulp Density: 5~20%, standard density 10%.

  9. Certainly Dry Finishing 5~30g, standard 10g.

  10.Beating Pressure: (3.33±0.1) N/mm bit length; (1.77±0.1) N/mm bit length; (4.89±0.1) /mm bit length.

  11. external dimensions: Long * wide * high,860mm×450mm×1100mm.

  12.Weight: 251Kg.