Brand:aa

Product detail:

 Introduction  

2. It is applicable to extract mud,gravel and sand for ships, marine land reclamation ,built wharf, power plant and mining.

3.centrifugal, one stage sand pump, high efficiency and energy saving.

4.Good NPSH performance.

5. Wear resistant flow parts: The flow parts are made of hard metal (Chrome alloy).

6. Long-term bearing life: The bearing assembly is composed of large diameter shaft and short overhang.

7. Pump of this series have distinctive innovation in hydraulic and structural design.

Application

1.The pump is applicable for pumping sand ,gravel,slurry or cinders for building, powdery sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc

2.Can be used for desilting and sand pumping for river channel, desilting for reservoir and port, poldering of seashore, unloading sand for sand blowing

Service condition

1. Power supply: The power source is 50(60)Hz/380(400,660)V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor.

2. Temperature of the medium: The temperature of the medium cannot exceed about 60Celsius, and the medium does not contain inflammable or explosive gases.

3. Max weight density of the solid particle: The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%.

  sand and gravel pump

Pictures of  Industrial used powered sand pump

NJQ sand pump