Brand:aa

Product detail:

Welcome to Lanco

  Single-stage Double-suction split volute casing water pump  Products Introduction

  Outlet diameter ; DN 80~800mm

 Capacity : Q ≤ 11600m³/h

 Head   :   H ≤ 200M

1.Production Outline:

     Model TPOW pump is single-stage double-suction split volute casing centrifugal pump and is specially design and manufactured by our company which based on the market requirement and introducing in German lead technology . 

       Pump through original impeller and modified impeller and cutting . The pump is full and broad ,high efficiency . In the performance scope,according to customers' needs,may provide pump with any flow and head.

2.USEAGE:

      This series is widely used in waterworks ,irrigation ,draining pump station ,electric power station ,air-conditioning circulation water,industrial water supply system ,fire fighting system,shipbuilding industry and general use in oil refining industry.

3.RANGE OF PERFORMANCE:

    Outlet diameter ; DN 80~800mm

     Capacity : Q ≤ 11600m³/h

     Head   :   H ≤ 200M

     Working pressure: P ≤ 2.5Pa

    Working temperature :T ≤ 105°C

     Working voltage :U=380V,6KV,10KV

4.STRUCTURE PERFORMANCE

    A. Compact structure ,less room occupied ,comparessed axial size.

    B. Low vibration ,low noise ,the following measure to reduce vibrates and noise.

        The pump casing is double-volute structure .

        Rotor part axial size is short and fine rigidity.

        The shaft uses high precise imported bearing.

5.Performance Datas:

Product Show