|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
pall CC3LGA7H133 Coalescer filter element
Coalescer Technical Information
Oleophobic/Hydrophobic Treatment –All of Pall's SepraSol liquid/gas coalescers receive a patented oleophobic/hydrophobic treatment. Chemically treating the coalescer lowers the surface energy of the medium and promotes rapid drainage of the coalesced liquids. Benefits of the surface treatment include increased capacity for liquid challenges, smaller overall assembly sizes, lower pressure drop, and improved ability to recover from liquid slugs.
Typical Applications
Pall's high-efficiency SepraSol coalescer is recommended for a wide range of gas filtration
applications, including:
| Protecting compressors and turbines |
| Protecting low and ultra-low NOx burners by cleaning fuel gas |
| Removing lubrication oil, water, compressor wear products, corrosion products, and other solids from effluent gas streams |
| Minimizing foaming tendencies in sweetening and dehydration units |
| Minimizing amine and glycol losses downstream of gas sweetening and dehydration units |
| Cleaning dirty fuel gas and instrument gas |
| Controlling injection well plugging during gas flooding |
| Protecting catalysts, desiccants and absorbants |
| Removing lube oil from ammonia gas |
Features, Advantages and Benefits of the Pall SepraSol Liquid/Gas Coalescer
Pall’s SepraSol liquid/gas coalescers eliminate virtually all solids and liquids in a gas stream. Downstream liquid levels are as low as
0.003 ppmw1and the solids removal rating is 0.3 micron (µm) (99.99% efficiency).
| Features | Advantages | Benefits |
Patented Oleophobic/ Hydrophobic Media Treatment | 1.More rapid liquid drainage 2.Lower saturated pressure drop 3.Faster recovery from liquid slugs | 1.Reduced capital and operating cost 2.Improved product quality and consistency |
| High Effective Filtration Area | 1.Fewer element changeouts needed 2.High solids removal efficiency | Lower operating and maintenance costs |
| High-efficiency Media and Draining Materials | 1.Consistent high-efficiency liquid remova 2.Reduced liquid losses 3.Optimum protection of downstream equipment | Lower maintenance costs and improved availability |
Technical Information
| Part Number | Outer Diameter (mm/in) | Length (mm/in) | Surface Area (m2/ft2) |
| CC3LGA7H133 | 70/2.75 | 762/30 | 0.88/9.5 |
| CC3LGB7H134 | 70/2.75 | 762/30 | 0.88/9.5 |
Click for original picture
Legal status confirmed
