Brand:aa
Product detail:
black spiral adhesive pvc pipe end cap 35mm
Applications Heat Shrink Cable End Cap is
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
Technical Data
Property
Test Method
Typical Data
Operating temperature
IEC 216
-55 °C to +110°C
Tensile strength
ASTM D 638
> 14 MPa
Elongation at break
ASTM D 638
> 400 %
Density
ASTM D 792
1.05
Elongation at break after aging
150 °C , 168hrs
> 300 %
Dielectric strength
IEC 243
> 15KV/mm
Volume resistance
IEC 93
> 1014Ω.cm
Specification
Part No.
Inner Diameter
After fully
recovered Length
± 10 %
After fully
recovered Width
± 10 %
Cable diameter
As supplied
(min)
After fully
recovered (max)
Standard length end cap
HS EC-12/ 4
12
4.0
40
2.6
4-10
HSEC-14/ 5
14
5.0
45
2.2
5-12
HSEC-20/ 6
20
6.0
55
2.8
6-16
HSEC-25/ 8.5
25
8.5
68
2.8
10-20
HSEC-35/ 16
35
16.0
83
3.3
17-30
HSEC-40/ 15
40
15.0
83
3.3
18-32
HSEC-55/ 26
55
26.0
103
3.5
28-48
HSEC-75/ 36
75
36.0
120
4.0
45-68
HSEC-100/ 52
100
52.0
140
4.0
55-90
HSEC-120/ 60
120
60.0
150
4.0
65-110
HSEC-145/ 60
145
60.0
150
4.0
70-130
HSEC-160/ 82
160
82.0
150
4.0
90-150
HSEC-200/ 90
200
90.0
160
4.2
100-180
Extended length end cap
HSEC-L-14/ 5
14
5.0
55
2.2
5-12
HSEC-L-42/15
42
15.0
110
3.3
18-34
HSEC-L-55/ 23
55
23.0
140
3.8
25-48
HSEC-L-62/ 23
62
23.0
140
3.8
25-55
HSEC-L-75/ 32
75
32.0
150
4.0
40-68
HSEC-XL-75/ 36
75
36.0
170
4.2
45-68
HSEC-L-105/ 45
105
45.0
150
4.0
50-90
End cap with valve is available on request.
Click for original picture
Legal status confirmed
