|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
auminium condactor for Enamelled aluminium wire Class180
1.Process of producing
We can producing all the sizes in following :
Round size:0.2mm-6.0mm
Flat size: Thickness(a): 1mm-10mm, Width(b): 3mm-16mm
2. Process of Producing & Testing
Maximum Overall Diameter, Conductor Diameter, Film Thickness, Conductor Resistance, Elongation, Spring Back, Mandrel Winding, Sudden Jerk, Cut Through, Heat Shock, Room Temperature Breakdown Voltage, High Voltage Hole, and Pin-Hole, etc.
| Code Number | Test Standard | GB/T23312-7-2009 | |
| Size | 2.0mm | Date | 2012-9-17 |
| Type Q(ZY/XY)L-240 polyesterimide coated with polyamideimide | |||
| Test Tens | Standard value | Test Result | |
| Size | Maximum | 2.112mm | 2.095mm |
| Conductor Diameter | 2.00mm | 2.012mm | |
| Tolerance Value | ±0.020mm | 0.012mm | |
| F Result | ≤0.020mm | 0.001mm | |
| Film Thickness | ≥0.075mm | 0.083mm | |
| 20°C Resistivity | 0.008698-0.009149Ω/m | 0.00903-Ω/m | |
| Elongation | ≥15% | 32.20% | |
| Adherence | Test Axis Around | Winding ID | OK |
| Flexibility | Sudden/Pull | ≥55R | 65R |
| Anti-Solvent | ≥1h | 2h | |
| Alt-Throngh | 320°C,2min | OK | |
| Hot Shock | 240°C,30min | OK | |
| Broken Down Voltage Will Room | ≥5.0KV | 11.3/9.7/12/11.5/kv | |
| Continuity | High Voltage Hole | / | / |
| Pin-Hole | ≤5pcs/6m | 1pcs | |
| Conculusion | OK | ||
3.Insulating Varnish for our enameled wire to guarantee quality.
We using ELANTAS insulating varnish for our enameled wire to guarantee quality.ELANTAS Co.,Ltd.is one of the subsidiaries of ELANTAS Electrical Insulation GmbH which is a division of ALTANA.
ELANTAS Electrical Insulation are enamels used for manufacturing of magnet wires.
They are coated on the surface of copper or alumina wires and cured to form electrical insulation film possessing certain mechanical strength, thermal resistant and chemical resistant properties. Some products could be used for other applications such as metal wires for decoration purpose and other insulating or thermal resistant coatings.
Our products are classified in the following categories based on main
polymers and applications:
1.Polyvinylformal Enamels
2.Polyurethane Enamels
3.Polyesterimide Solderable Enamels
4.Polyesterimide Enamels
5.Polyester Enamels
6.Polyamideimide Enamels
7.Polyimide Enamels
8.Nylon Enamels
9.Bondable Enamel
Click for original picture
Legal status confirmed
