Brand:aa

Product detail:

Description of Silicone Rubber Material 

Silicone Rubber Material is a kind of two-component material, and the silicone rubber material includes Part A base silicone and Part B CA30 curing agent. The Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Specifications of MC RTV-2 Silicone Rubber

Equipped with REACH certificate 

Professional technician with rich experience 

4% catalyst is offered for free of charge  

Silicone range:10-60 shore A  

High duplicating silicone molds(500-600)

Features of Silicone Rubber Material 

1. Good flow ability and long working time

2. Medium hardness

3. High tear and tensile strength

4. Easy de-mould from complex replica parts

5. Acid and alkali-resistance

6. Low linear shrinkage

Applications of Silicone Rubber Material 

MC silicone rubber can be applied in many objects mold making, since MC silicone rubber has good flow ability and medium hardness, and the silicone can cure at room temperature, thus it's a good material for duplication.

RTV-2 Silicone Rubber can be used for artificial stone moldmaking.For example RTV2030,RTV2066 and RTV2088 silicone.

RTV-2 silicone rubber can be appliied in candle and soap moldmaking, such as RTV215 and RTV218 silicone.

RTV-2 silicone rubber can be used for plaster moldmaking, such as RTV2025,RTV2028 and RTV2030 silicone.

RTV-2 silicone rubber can be applied in the field of shoe sole moldmaking, for example, RTV3010 and RTV3015 silicone.

RTV-2 silicone rubber can be used for prototyping and electronic potting.

MC Silicone Rubber can be used in the reproduction of cement molding, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.

Instructions for Making silicone Molds

1. Make sure the surface of the original is clean and free of loose material. 

2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.

3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.

4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base. 

5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original

6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.

Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole:

E-mail:nicole(at)mcsilicone(dot)com

Skype:nicoleszmc

MSN: nicoleszmc (at)hotmail(dot)com