|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
Structure of SAE J1401 rubber hose
1.>Internal hose: EPDM
2.>Reinforcement: two white cotton line
3.>Cover: EPDM
4.>Usage:motorcycle and automobile brake part
Technical parameters of rubber hose
Part No. | GSG111 rubber hose | |
ID X OD | 3.2X10.5mm and 4.8x12.5mm | |
Struction | EPDM+two white cotton line +EPDM | |
Burst pressure | >75 Mpa | |
Flax whip test | >35 hours | |
Tensile power | >2000N | |
Low expansion | 6.9Mpa | <1.08cm3/m |
10.3Mpa | <1.38cm3/m | |
Low temp | -50 C | |
High temp | >135 C | |
Ozone | 50+8ppm;40°c+3°c 72H 7T no cracks | |
FOB Qingdao price | USD 0.8-1.2/m | |
Other styles rubber hose for your choice
Steel braided brake hose | Hydraulic rubber hsoe | Air rubber hose | Oil rubber hose |
3.2x6.5mm | 3.2x10.5mm | 10x17mm | 3.2x10.5mm |
3.2x6.5mm(teflon) | 4.8x12.5mm | 10x19mm | 4.8x12.5mm |
3.2x7.5mm | Other size in your need | 13x22mm | Other size in your need |
Samples
free rubber hose samples are available.
Lead time
Usually takes 30 to 45 days after the confirmaiton
Packages for rubber hose
Carton Packing/in your request
carton size : 50x30x20 cm,70x20x15 cm,70x25x15 cm
1.>profile of hydraulic hose GSG 003
2.>hydraulic hose in roll
3.>hydraulic hose used for brake assembly
4.>hydraulic hose in package
About out factory
1>Founded: In 1996
2>A hydraulic hose professional manufacturer and exporter
3>Certification: ISO9001-2000, TS16949-2002
4>Used: For any type of vehicles
5>Output:Hydraulic Brake hose (2, 000, 000m/year); Brake hose assembly (100, 000PCS/month): Fitting (2, 000, 000PCS/year)
6>Quality:hydraulic hose For OEM & Aftermarket
7>Selling point: High cost performance
If any interest ,welcome your inquiry for hydraulic hose ,of course also can in MSN Skype or telephone!
Best regards!
Hedy
ISO/TST16949 certificate
Click for original picture
Legal status confirmed
