|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
316 stainless steel
Introduction
316 stainless steel, 18Cr-12Ni-2.5Mo because adding Mo, so the corrosion resistance, weather resistance and high temperature strength in particular, in the harshness of the conditions of use; hardening excellent (non-magnetic).
| Artical | china suppier 316 stainless steel plate 100mm thick | ||||||
| Specification | 1000mm*2000mm,1219mm*2438mm or as your requirement | ||||||
| Surface | NO.1 | ||||||
| Type | plate | ||||||
| Thickness | 3mm~100mm | ||||||
| Mill | TISCO/ BAOSTEEL/ JISCO/ ZPSS | ||||||
| Usage | Pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials used.2013 should also be in the field of the solenoid valve, mainly for housing, clamps, ball, valve, valve seat, nut, stem, etc | ||||||
| Packing | Standard export packing | ||||||
| Payment terms | 1.30%T/T in advance, the balance against the B/L copy | ||||||
| 2.30%T/T in advance, the balance against the L/C at sight | |||||||
| 3.100%L/C at sight | |||||||
| Dilivery time | 1.10days after receving the deposit of T/T | ||||||
| 2.10days after receving the L/C original | |||||||
Chemical properties
| Typical chemical composition | ||||
| % | 304 | 304L | 316 | 316L |
| C | 0-0.07 | 0-0.03 | 0.8 | 0.03 |
| Mn | 0-2.0 | 0-2.0 | 2 | 2 |
| Si | 0-1 | 0-1 | 0.75 | 0.75 |
| P | 0-0.05 | 0-0.05 | 0.045 | 0.045 |
| S | 0-0.02 | 0-0.02 | 0.03 | 0.03 |
| Cr | 17.5-19.5 | 17.5-19.5 | 16.0-18.0 | 16.0-18.0 |
| Ni | 8-10.5 | 8-10.5 | 10.0-14.0 | 10.0-14.0 |
| Mo | 2.00-3.00 | 2.00-3.00 | ||
| N | 0.1 | 0.1 | ||
| Fe | Balance | Balance | ||
Pysical properties
Tensile strength σb (MPa) ≥ 520
Conditions yield strength σ0.2 (MPa) ≥ 205
Elongation δ5 (%) ≥ 40
Section shrinkage ψ (%) ≥ 60
Hardness: ≤ 187HB; ≤ 90HRB; ≤ 200HV
Surface
Pictures of products
Mill test certificate
Packing
Application
316,Pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials used.2013 should also be in the field of the solenoid valve, mainly for housing,
clamps, ball, valve, valve seat, nut, stem, etc
Stock picture
Workshop
Welcome to contact us
Click for original picture
Legal status confirmed
