Brand:aa
Product detail:
Auto Extrusion Blow Moulding Machine(JN-S120L)
♦ Single station
♦ The Max. product volume is 120 liters.
♦ The extrusion material store capacity is 12.8L.
The Features
- The screw adopts high potency melt to make sure the material well mixed.
- Adopt the frequency control of motor system to reduce the power consumption.
- Adopt horizontal movement frame to improve stability and speed.
- The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase the life span.
- High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
- The extrusion head use spreader or screw type to well mixed the thickness and easy to change the different color.
- Advances design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
- The precise time control system assured good quality, suitable weight and reduces production cycle.
- Freely to move the extrusion foundation backward and forward to make the exchange of the mold easy.
- Multi-function bottom blowing type for shaped products.
- The mechanical arm can take out the products automaticaly.
General Specifications(JN-S120L)
| Max. product Volume (L) | 120 |
| Dry cycle (pc/h) | 360 |
| Screw diameter (mm) | 100 |
Screw L/D ratio (L/D) | 24~26 |
| Screw motor power (kw) | 45~75 |
| Screw heating capacity (kw) | 8.4~10.5 |
| No. of heating zone (zone) | 4~5 |
| Output of HDPE (kg/hr) | 200~280 |
| Oil pump driver power (kw) | 37 |
| Clamping force (KN) | 440~650 |
| Mold Stroke (mm) | 500~1400 |
| Size of Mold (W*H) mm | 900*1450 |
| Max. Dia Diameter (mm) | 420 |
| Die Heat Capacity (kw) | 10.8 |
| Blowing Pressure (Mpa) | 0.8 |
| Air Volume (M³ /Min) | 1.6 |
| Cooling Water Pressure (Mpa) | 0.3 |
| Water Consumption (L/min) | 150 |
| Weight of Machine (Ton) | 17 |
| Size of Machine(L*W*H) (m) | 5.2*2.5*4.2 |
Main Characteristic:
1. Single station, single layer, 100mm screw, 45~75kw screw motor power, PE / PP etc.
2. Power supply: 380VAC, 50Hz (depending on client's county ).
3. One die Head(the picture is in the below);
4. MOOG 100 Points Parison Controller (Optional)
Component Parts
( Type C Machine Component List )
- PLC controller: Germany SIEMENS
- France Schneider low-voltage apparatus
- Domestic test components
- Siemens Beide electrical motor
- Taiwan Delta VFD-B frequency
- USA Vickers hydraulic valve
- Taiwan Airtac air valve(UAS numatic air valve)
- No 1 & No 5. Eelectrical control panel
- Brand: Schneider and OMRON
- No 2. Pneumatic System
- Brand: Schneider
- No 3. Oil Pump/Selector Valve
- Brand: Northman or Vickers
- No 4. Oil Pump/ Selector Valve
- Brand: VICKERS or YUKEN
- No 6. Hydraulic System
- Brand: Taiwan Northman, Japan YUKEN, and America VICKERS
- No 7. Parison Controller
- Brand: MOOG(100 points)
Click for original picture
