|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
automatic flake ice maker
Technical parameters of automatic flake ice maker
Model (No.) | Ice making capacity (Ton/24h) | Capacity of refrigeration (KW) | Machine Dimension (mm) | Weight of Machine (Kg) |
BF500 | 0.5 | 3.75 | 1220×900×1000 | 160 |
BF1000 | 1 | 8.85 | 1300×960×1200 | 210 |
BF2000 | 2 | 17.84 | 1500×1200×1350 | 360 |
BF3000 | 3 | 24.15 | 1800×1250×1400 | 1000 |
BF5000 | 5 | 35.1 | 2100×1250×1500 | 1100 |
BF6000 | 6 | 45.85 | 2500×2040×2200 | 1100 |
BF8000 | 8 | 52.7 | 2100×1250×1500 | 1300 |
BF10000 | 10 | 76.1 | 2300×1750×1740 | 1500 |
BF15000 | 15 | 110.9 | 3200×2100×2000 | 3200 |
BF20000 | 20 | 151 | 3400×2200×2560 | 4200 |
BF30000 | 25 | 180 | 3800×2300×2560 | 5000 |
BF35000 | 30 | 214.2 | 4500×2300×2800 | 6000 |
BF40000 | 40 | 226.1 | 7800×2100×2480 | 7500 |
BF50000 | 50 | 268.1 | 5000×2300×3000 | 10700 |
BF60000 | 60 | 278.4 | 5500×2300×3200 | 12000 |
Brief introduction into automatic flake ice maker .
1. The temperature of ice is lower and it reach 8 celsius degress below zero.
2. Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.
3. it has the flake shape so that it has big contact area with refrigerating products and the effect is excellent.
4. flake shape has no sharp edges, cannot destroy refrigerating products and it is beneficial for storage and transportation.
5. The thickness of flake ice is 1mm to 2mm. No need to crush and can use at any time.
Features of automatic flake ice maker .
1. Higher refrigeration efficiency and lower loss of refrigeration capacity
Automatic flake ice machine adopts the latest vertical evaporator with inner helix ice cutter. In the process of ice making, the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed, the helix ice cutter drops down and cut ice. In this method, it makes a full use of evaporator and increase the efficiency of ice making.
2. High quality, dry and non-caked
The thickness of flake ice which produced by automatic plate ice machine with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility..
3. Simple structure and small land area
The series of ice flat has different kinds including fresh water type, seawater type, fixed cold source type, equip cold source by customer, and ice flat machine with cold room. And the daily capacity is ranges from 500kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine, it has advantage of small land area and low operation cost (no man for ice harvest)..
Click for original picture
Legal status confirmed
