|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
TL clay roof tile press machine
Introduction
Newly designed cement/concrete roof tile machine adopts PLS programmable controller featuring fast moulding speed,large output automatic control,manmachine interface,reliable performance and convenient operation,it has 8 p/m,whole hydropneumatic production speed,high ratio of finished products and high cost performance.
Features
This equipment adopt advanced technology. It has better mechanism capability and economic benefic.
1. Fast forming speed,high production. Four-Post Type Tile Making Machine features PLC automic control, man-machine interface and dependable performance.
2. After the mortar is plastically rolled,the concrete tiles thus fabricated features in perfect, various style,high density, high intensity and accurate size, so that they can meet the needs of different constructions.they are best among concrete products
3. One machine can be used for multiple purposes.by changing the moulds, the equipment can produce various styles of main tiles,ridge tiles,edge tiles and ditch tiles.Also it can produce different styles of high grade concrete floor tiles and wash tiles simultaneously.
Features
1.unique water-proof structure
Only the tile shaped by Pressure filtration style mould can make tile valley bottom structure, which could make the rainwater fall more smoothly and quickly. And it could avoid the countercurrent which might be arisen by common concrete tile shaped by Rolling type molding.
2.easy to construct
The vertical and horizontal laying construction are both convenient and feasible.
3.strong wind resistance
It makes snap-in slopes in the roof which develops the roof to be a tight unit.
4.good heat protection
The test shows the temperature of the tile surface is 71.4 Fahrenheit(21.89 centigrade) in the
hottest three months.
5.freezing-thawing resisting
It meets the JIS Standards.
6.permeability resistance
Technological Parameter
Model | MYWJ-125 |
Overall Dimension | 3120×1750×2650 mm |
Moulding Cycle | 8-10 s |
Moulding Pressure | 1250 KN |
Weight of Main Engine | 5.5 t |
Equipped Capacitor | 5.5 kw |
Production Capacity | 3800-4000 pcs/day |
Tile Size | 424×377 mm |
Molding speed | Mold of operation | Host motor | voltage | factory | Number | Color tile specifications | Class production | Total power |
8/minute
| Full-automatic | 7.5KW
| 380V
| 10*16.5m
| 4-5person
| 424×337mm
| 3500-4000 piece
| 17KW
|
The Consist of machine
1.molding tile forming machine
2.wheel agitator
3.automatic weighing and feeding machine
4.bucket elevator
5.steel tile holder
Click for original picture
Legal status confirmed
