|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
making cage machine
Welding wire diameter 2.0-3.0(mm)
Welding mesh size 25X20(mm)
Welding width 1200(mm)
Fields of application: to weld the meshes for cultivating cages, various pet's cages and
various meshes of small specification.
Product features:
1,CNC wheel-step is designed to provide the mesh grid with high accuracy.
2,Electrode lifting system is able to extend electrode life.
3,Line wire vertical straightening system can straighten the wire in high quality.
4,Unique high speed air cylinder used on welding electrode can provide high reliability.
5,Welding pressure steplessly adjusting applies to multiple wire diameter.
6,High speed mesh cutting system.
7,There are two choices for traction of mesh. One is single car to draw, the other is two cars to do by turns.
8,Straightening and sending of cross wires are completed by the automatically high-speed feeding system.
9,It is the most important that the equipment has high efficiency and be able to produce the high-quality meshes.
Technical parameters
Model | DNW-CNC1000 | DNW-CNC1200 | DNW-CNC1500 | ||
Installed power(kva) | 3*60 | 3*80 | 4*80 | ||
System coltagte(v) | 380V 50Hz | 380V 50Hz | 380V 50Hz | ||
Control voltage(v) | 24V | 24V | 24V | ||
Max.mesh width | 1000 | 1200 | 1500 | ||
Line wire spacing | ≥20mm steplessly adjustable | ||||
Cross wire spacing | ≥25mm steplessly adjustable | ||||
Wire diameter(mm) | 2-3 | 2-3 | 2-3 | ||
Max.welding capacity | 3+3 | 3+3 | 3+3 | ||
Max.wlding speed(time/min) | 40-60 | 40-60 | 40-60 | ||
Max.welding spot nos.(group) | 21 | 24 | 31 | ||
Pressed air(MPa ) | ≥0.8 | ≥0.8 | ≥0.8 | ||
Wire feeding method | coil feeding | ||||
Caterconer accutracy | ≤2 | ≤2 | ≤2 | ||
Welding material | galvanized wire or cold drawing steel wire | ||||
Each part shows
Click for original picture
Legal status confirmed
