|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
Defluorination Activated Alumina Ceramic Ball
* Chemical desiccant, adsorbent
* High strength
Defluorination Activated Alumina Ceramic Ball
Activated alumina has much micro-paths, so the specific surface is large. It can be used as absorbent desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecular polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
Activated alumina defluorinated just as the anion exchange resin, but the selectivity is much strong. The
defluorination effect of the actived alumina is good. The capacity is stable, the absorbed fluorine is 6400g/cm3.
It has high strength, low abrasion, no soften in water, no expansion, no powdery, no crack. It can widely used in
the deep drying of cracked gas,ethylene and propylene,hydrogen-generation,air separation,instrument air drying,
and fluorine treatment for H2O2, also in the adsorbing pollution material, such as H2S,SO2,HF and paraffin in the
water gas, especially in the drinking water defluorination.
HL1101 | HL1102 | HL1103 | HL1104 | HL1105 | ||
Appearance | Whte, Sphere, No Odor, Insoluble In Water, Innocuous | |||||
Crystal Type | x-p | x-p | y | y | x-p | |
Chemical Composition | Al2O3 % | ≥93 | ≥93 | ≥93 | ≥93 | ≥90 |
Na2O % | 0.3 | 0.3 | 0.5 | 0.15-0.3 | 0.3 | |
LOI | % | 6-8 | 6-8 | lessthan 8 | less than 5 | 6-8 |
Bulk Density | g/ml | 0.68-0.72 | 0.70-0.75 | 0.65-0.75 | 0.70-0.80 | 0.68-0.72 |
Surface Area | m2/g | ≥280 | ≥280 | 200-260 | ≥200 | ≥300 |
Pore Volume | ml/g | 0.30-0.45 | 0.30-0.42 | 0.40-0.46 | 0.40 | 0.30-0.50 |
Static Absorption (RH=60%) | % | Water Absorption | Fluorine Absorption | Water Absorption | Water Absorption | Water Absorption |
Active | % |
|
| 56-62 |
|
|
Attrition Loss | % | 1.0 | 1.0 | 1.0 | 0.4 | 0.8 |
Crushing Strength (mm) | 0.4-1.2 |
| ≥30 |
|
|
|
1-2 | ≥40 | ≥40 |
|
|
| |
2-3 | ≥60 | ≥60 |
|
|
| |
3-5 | ≥100 |
| ≥100 | ≥100 | ≥100 | |
4-6 | ≥120 |
| ≥130 | ≥120 | ≥110 | |
HL1101: is for as adsorbent
HL1102:is for defluorinating
HL1103:is for absorption in producing hydrogen perixide (H2O2)
HL1104:is for catalyst carrier
HL1105:is for dehydrating and drying in air seperation etc.
Click for original picture
Legal status confirmed
