|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
Cold pressed extra virgin grape seed oil machine from manufacturer
OUR MAIN BUSINESS FIELD:
10-500T/H oil material first cleaning, drying and storage section turn-key project;
100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion,
and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key
project;
100~300TPD Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop
type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax
recovery, leaching workshop degum, phospholipid concentrate);
30-1000T/D oil continuous grade one or two physical (chemical) refining production line;
20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project;
10-200T/D Fatty acid esterification production cooking oil production line.
OUTSTANDING ADVANTAGES:
1. Steel materials of the machine are purchased from the steel manufacturering factories directly, so the materials are in high quality;
2. We have top engineer group and long-term cooperation with several research institutions, we serve the satisfied designs for our customers.
3. Our workers are professional, each of them has been trained strictly before their job;
4. We supply the high grade, the consummation after-sale service.
PRODUCTION CAPACITY:
Raw Material | Oil yield(%) | Thickness of Cakes(mm) | Residual Oil in cakes(%) |
Sesame | 46-52 | 1.0-1.5 | <=3 |
Peanut | 45-50 | 0.8-2.0 | <=4 |
Rapeseed | 30-40 | 1.0-1.5 | <=4 |
Sunflower | 45-52 | 1.2-1.5 | <=3 |
Soybean | 12-18 | 0.8-1.5 | <=3 |
Flax seed | 33-40 | 1.0-1.3 | <=4 |
Moringa seed | 30-35 | 0.8-0.9 | <=3 |
Olive | 45 | 1-1.5 | <=6 |
Pumpkin seed | 38 | 0.8-1.2 | <=4 |
COMMON OIL YIELD:
OPERATION PRINCIPLE:
When expeller is on, enter the materials into the chamber from the hopper, then they'll be moved forward by the rotating pressing screw and pressed;
On the one hand, under the high-pressure condition in the chamber, friction between material and screw, and chamber will be created. It also create friction and relative movement among material particles;
On the other hand, the diameter of the pressing screw becomes large from one end to the other when rotating. It not only pushes particles moving forwards but outwards as well;
Meanwhile, particle adjacent to the screw will rotation along with screw′s rotating, causing every particle inside the chamber to process different speed.
Relative movement among particle creates heat which is necessary for oil manufacturing.
The heat helps to protein degeneration, damage colloid, increase plasticity, decrease oil′s viscosity, and finally result in high oil yield.
SUPPLY AND SERVICE:
1. Whole set of equipment for production line;
2. Motor and power control system;
3. Installation material;
4. Drawing of process description, equipment layout, foundation and
5. Hole, construction;
6. Drawing of power control;
7. Staff training and long-term technical service.
Click for original picture
Legal status confirmed
