|
|
||||||||||||||||||||||||||
Brand:aa
Product detail:
new plasticizer
Application: To make sure of good quality and reduce the production cost for the middle and low-end PVC products, we developed Epoxy Fatty Acid Methyl Ester S-03, which can be used for the production of car floor, advertising cloth, electric wire,cable and recycled plastic granules, etc.. With the lower pricing, it can reduce the production cost of PVC products.
Product Features:
1.Epoxy Value: With the higher epoxy value 4.5 ,Epoxy Fatty Acid Methyl Ester S-03 is your first choice for manufacturing ordinary plastic products in the similar products .It enjoys good compatibility with PVC resin ,low vaporization and good stability to the light and heat.It can increase the flexibility, and enhance the cold/ heat resistance of PVC products.
2.No odor: Through the technological improvements for a long time, now our product epoxy fatty acid methyl ester has no odor.
3.Color: The color is yellowish, and the APHA is about 55-65
4.Flash Point: The flash point of Epoxy Fatty Acid Methyl Ester No.3 is 180°C
Products Index:
Item | Standard | Result |
Epoxy value(%) | ≥4.0 | 4.5 |
Moisture(%) | ≤0.5 | 0.05 |
Acid Value(mgKOH/g) | ≤1 | 0.36 |
Color(APHA) | ≤100 | 55-65 |
Iodine Value(g/150g) | ≤5 | 4.07 |
Flash Point(°C) | >170 | 180 |
Density(e20°C/) | 0.94-0.96 | 0.94 |
Odor | NO | NO |
Condensation Point(°C) | 8 | 5 |
Click for original picture
Legal status confirmed
