Product detail:

Performance
Rated Power (Pmax)r: 125 watts
Power Tolerance: ±3%
Nominal Voltage: 12 volts
Warranty: 25 years

Configuration
J BP 380J Clear Universal frame and standard J-Box
S BP 380S Clear Universal frame with LoPro J-Box and and polarized Multicontact (MC) connectors

Electrical Characteristics:
Maximum Power (Pmax): 125 Watts
Voltage at Pmax (Vmp): 17.4 Volts
Current at Pmax (Imp): 7.2 Amps
Warranted minimum Pmax: 121.3 Watts
Short-circuit Current (Isc): 8.1 Amps
Open-circuit Voltage: 22.0 Volts
Temperature coefficient of Isc: (0.065±0.015)%/°K
Temperature coefficient of Voc: -(80±10)mV/°K
Temperature coefficient of Power: -(0.5±0.05)%/°K
NOCT (Air 20°C, Sun 0.8kW/m², wind speed 1m/s: 47±2°C
Maximum series fuse rating: 15 amp (S) / 20 amps (J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)

Mechanical Characteristics

• S,J Solar Cells : 36 cells (156 x 156 mm) in a 4 x 9 matrix connected in series
• S Output cables : RHW AWG #12 (4 mm²) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
• J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG² (2.5 to 10 mm) wire.
• S,J Diodes IntegraBus^TM technology includes Schottky by-pass diodes integrated into the printed circuit bus.
• S,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
• S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.

Quality and Safety

• Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
• Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
• Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
• Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
• Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)

Qualifications Test Parameters
Temperature cycling range: 40°F to 185°F (-40°C to 85°C)
Humidity freeze, damp heat: 85% RH
Static load front and back (e.g. wind): 50 psf (2400 Pa)
Front loading (e.g. snow): 113 psf (5400 Pa)
Hailstone impact: 1" (25 mm) hail at 52 mph (23 m/s)

S,J
Dimensions (LWD): 59.4" x 26.5" x 1.97" (1510 x 674 x 50 mm)
Weight: 26.5 lbs (12.0 kg)