Certification:

CE

Voltage:

220V

Item Type:

Other

Product Description

Product Description [Name] :1/3W/5W aluminum plate

[Size] diameter: 20mm, thickness: 1.6mm

[Applications]: a 1W or 3W or 5W

[Features]: convenient, low thermal resistance welding, rapid heat transfer

[Surface treatment]: anodizing

[The thermal conductivity]: 1.6

[Weight]: 1.2 grams               (A) LED welding conditions
(1) soldering iron: the tip of the soldering iron (up to 30W) temperature does not exceed 300; necessary grounding soldering iron, Electrostatic notsuper range; welding time is not more than 3 seconds; welding position of at least 3 mm from the gel.
(2) The dip soldering: the dip soldering maximum temperature of 260; the dip soldering time is not more than 5 seconds; dip soldering position of atleast 3 mm from the gel.

(B) pin forming method
(1) must be 2 mm from the gel to bend bracket.

(2) The stent fixture or done by professionals.

(3) The stent must be completed before welding.

(4) stent is the need to ensure the pin and spacing consistent with the circuit board.

(C) LED installation method
(1) Note that the perimeter of the arrangement of the various types of devices to prevent wrong polarity. Devices not to get too close to the heating element, and working conditions do not exceed the limits of its provisions.

(2) Be sure not to install pin deformation LED.

(3) When decided to calculate a good face and circuit board Pitch dimensions and tolerances in order to avoid the bracket by excessive pressure inthe hole installed.

(4) Install LED, it is recommended to use the guide sleeve positioning.

(5) before the return to the normal soldering temperature must be avoided to make the LED be any vibration or external force.

(D) Cleaning
When chemical cleaning colloidal must be especially careful, because some chemicals on the colloid surface damage and cause discoloration such as trichlorethylene, acetone. Available ethanol wipe, dipping time of not more than three minutes at room temperature.      1W High Power Taiwan Epistar Chip LED Bulb Lamp Beads 110lm-120lm, Pure Cool White, Warm White, with heat sink/100pcs US$ 48.50/lot
100 pieces / lot   3W 180lm-200lm High Power Taiwan Epistar Chip LED Bulb Lamp Beads / Pure Cool White Warm White / with aluminum heat sink/200pcs US$ 92.50/lot
200 pieces / lot   200PCS 1W High power led Source cold white 5800-6500K 350mA DC3.00-3.5V 110-120LM Factory wholesale Free Shipping US$ 32.80/lot
200 pieces / lot   50PCS 3W High power led Source cold white 5800-6500K 350mA DC3.00-3.5V 200-220LM Factory wholesale Free Shipping US$ 16.80/lot
50 pieces / lot
  150PCS 3W High power led Source cold white 5800-6500K 350mA DC3.00-3.5V 200-220LM Factory wholesale Free Shipping US$ 46.50/lot
150 pieces / lot   150PCS 3W High power led Source warm white 2800-3500K 700mA DC3.00-3.8V 180-200LM Lamp beads Factory wholesale Free Shipping US$ 66.50/lot
150 pieces / lot   1W 110lm-120lm High Power Taiwan Epistar Chip LED Bulb Lamp Beads / Warm White / with aluminum heat sink/100pcs US$ 45.50/lot
100 pieces / lot   100PCS 3W High power led Source warm white 2800-3500K 700mA DC3.00-3.8V 180-200LM Lamp beads Factory wholesale Free Shipping US$ 47.50/lot
100 pieces / lot