Verified Company
Zhongshan Yatai Machinery Co., Ltd.
Click to enlarge
1,Specifications
| Model No. | YT-220+T |
| Voltage | AC220V-50Hz |
| Power consumption | 300W |
| Cutting Length | 1-9999mm |
| Tolerance | ±(0.2+0.002*L)mm |
| Strip Length | 0-20mm(both ends) |
| Gauge | AWG#18-AWG#28 |
| Max diameter | 4mm |
| Process capacity | 3000-6000pcs/h |
| Knife material | Tungsten steel |
| Size | 450*670*350 L*W*H mm |
| Selected unit | Wire feed,Wire collect |
2,Company card
3,Product details
Main advantage :
1.High efficient machine
2.Taiwan step motor and driver
3.Cutting,stripping by automatic.
4.Economy model
Easy operation drawing:
1.Normal wire (Wire length:55-9999mm) as drawing
The parameters as below :
Program No. 02 Speed 05
Wire length 0100 Quantity produce 0000
Head wire 007 Strip off 004
End wire 005 Strip off 003
Mid stripping 0000 Mid stripping 0000
Mid stripping 0000 Mid stripping 0000
Strip off 0000 Set quantity 1000
Guage 45 Retract blade 05
Notice When you test the machine , if products were no good (Such as damage
with wire cord/can’t remove the cover), please amend the number of Guage.
2,Short wire (Wire length:9mm-55mm)
Program No. Speed
Wire length Quantity produce:
Head wire Strip off
End wire Strip off
Mid stripping 0000 Mid stripping 0000
Mid stripping 0000 Mid stripping 0000
Strip off 0000 Set quantity 1000
Guage 0045 Retract blade 0005
Notice:Adjust the pressure one by one , in order to lock the wire between two roller .
When you test the machine , if the wires were no good. Amend the number of pressure
and guage one by one .
3,Middle stripping as drawing
The parameter as below
Program No. 0099 Speed 0005
Wire length 0500 Quantity produce 0000
Head wire 0003 Strip off 0004
End wire 0004 Strip off 0005
Mid stripping 0100 Mid stripping 0200
Mid stripping 0300 Mid stripping 0400
Mid Strip off 0005 Set quantity 1000
Guage 0045 Retract blade 0045
Notice In this case, the pressure should be more higher than normal wire.if not ,
the mid stripping will be too small or can’t move out .It depends on the material hardness.
4,Produce and assemble
5,Warehouse
6,Shanghai Exhibition
7,Certificate