Click to enlarge
（1.5-10）×1600mm CNC Manufacture High-Speed Slitting Line,Slitting machine, slitting equipment, slitting machine, slitting line, slitting line, rolling shear, rolling shear equipment, slitting line
Slitting machines, precision slitting machine, slitting lines, meta l slitting machine, steel slitting machine, slitting line, slitting machine,
Sheet slitting line, slitting plate production line, plate production line slitting, sheet slitting machine, slitting machine plate, plate slitting machine,
High Speed Slitting lines, CNC slitting lines, open-book school split machine, slitting machine coil straightening
www.tengdimc.com
I. SPECIFICATIONS OF SLITTING LINE
(1.5—10)×1600mm
II. FUNCTION OF SLITTING LINE
This line is apply for various kinds of steel plates slitting, recoiling. It used to uncoiling large coil drum plate, and slitting into umpty strips as required width, then to recoiling and packing into whole bale of plane plate for next procedure of cold-bending, punching, pipe welder, etc.
III. TECHNOLOGICAL PROCESS & TECHNICAL PARAMETER
Working Process:
Charging—uncoiling—pressing and guiding—pinch preleveler—shear—transitional worktable —guiding—slitting—scrap winding—transitional worktable —
pre-separating—damping pressing—separating—recoiling—manual
baling—discharging.
Major Technical Parameter:
1． Thickness of coil plate: 1.5-10mm
2． Material of coil plate: Hot rolled coils
3． Width of coil plate: 1100—1500mm
4． Coil plate I.D: φ750—φ850mm
5． Coil plate O.D: φ1700mm
6． Weight of coil plate: ≤20T
7． Slitting precision: width tolerance:± 0.1mm
Vertical tolerance(side bending): ≤0.8mm/m
8． Min. slitted strip width: 100mm
9． Slitting speed: 0━50m/min（Tensile shear）;
0━30m/min（Synchronization scissors）；
10． Recoiling diameter: φ760mm
11． Slitting strips: thickness 3-6mm, 13strips; 7-8mm,8strip;9-10mm,6strips;
accompany of 28pcs blade
12． Elevation height: 800mm