Verified Company
Shenzhen Lianhuan Silicone Rubber Co., Ltd.
Click to enlarge
CONDENSATION CURE RTV-2 MOLDMAKING SILICONE
Product | Catalyzed Viscosity:cps | Base Color | Specific Gravity | Mixed Ratio | Shore A Hard | Tensile (Mpa) | Elongation % | Tear KN/m |
RTV M10 | 15,000 | Translucent | 1.15 | 100:2 | 10-12 | ≥1.8 | ≥500 | ≥2.0 |
RTV M20 | 17,000 | Beige | 1.25 | 100:2 | 20-22 | ≥2.8 | ≥500 | ≥2.0 |
RTV M25 | 18,000 | Beige | 1.25 | 100:2 | 25-26 | ≥3.2 | ≥480 | ≥2.5 |
RTV M30 | 25,000 | Beige | 1.21 | 100:2 | 30-32 | ≥3.8 | ≥460 | ≥2.8 |
RTV M330 | 20,000 | Translucent | 1.28 | 100:2 | 22-20 | ≥3.2 | ≥460 | ≥2.2 |
RTV M40 | 39,000 | Off-white | 1.10 | 100:2 | 43-45 | ≥2.8 | ≥380 | ≥1.8 |
1. RTV silicone rubber for fountain molding applications:
Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, table crafts, candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. RTV silicone rubber for fountain molding description:
Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50A° After curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
3. RTV silicone rubber for fountain molding operations:
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; Contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: Our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.
We can provide you the best quality rtv silicone rubber with competitive price and free remold technology.
Any question ,please feel free to contact MS Betty Xu
TEL:0086-755-27052112
FAX:0086-755-27052562
Mobile:0086-15814448960
skype:betty8980
Website:www(dot)lhsilicone(dot)com