Verified Company
Jiaxing Jinyi Solar Energy Technology Co., Ltd.
Click to enlarge
Jinyi Split Solar System (With One coil)
How split solar system works:
JinYi split solar system is an active system. It uses a solar workstation the fluid between heat pipe solar collector and pressurized water tank. Tank and solar collector are separate, solar collector could be installed on the roof or somewhere sunshine could shine on, while tank, solar workstation could be installed anywhere of the building. The piping between the main components is twin way pre-insulated solar hose. one coil system is suit for climates where there is risk of freezing. it is the simplest and the most typically and the least expensive active system. The system operates at standard line pressure. The system integrates easily with existing systems.
SPLIT SOLAR WATER HEATER SCHEMATIC DIAGRAM
The main components of (With one coils) Split solar system:
1) JINYI heat pipe solar collector.
2) Solar Workstation (Single pipeline pump station or Double pipeline pump station).
3) Relief check valve, T & P valve, Air vent valve
4) Pressurized water tank with one coils, 200liters
Specification of pressurized solar water heater:
| Specification | JSH1-200-24 | |
| Solar water tank | 1pc | 200L, with electric heater for back up heating |
| ETC solar collector | 1pc | 24tubes, with back stand or roof hooks |
| Pump station | 1pc | Wilo RS15/6, SR868C9 controller, safety valve, manometer, etc. |
| Expansion vessel | 1pc | 12L, with wall mountings |
| Connection kits | 1set | brass connectors |
| Auto air vent valve | 1pc | 1/2" |
| Solar hose | 1set | 1/2", twin pipe insulated flexible stainless steel pipe (optional) |