Click to enlarge
We have the 18years history,we have waste tire refining oil equipment,waste plastic refining oil equipment,waste tire and plastic all-in-one refining equipment.
over the years,we joint scientific department and in more than well-known exports and scholars,Continuously improve our technical strength.recently,we have 6 R&d engineers and 20 technical personnel,the products is full automatic continuous production,and have full automatic feeding and full automatic slagging .
the environmental friendly is one of our high technology,Using this equipment ,main would produce water, sound ,slag,waste gas,through our patented products: recycling pool,Sulfur removal system,full automatic slagging system,and The noise static special treatment, all can meet the national discharge standards,no pollution.and our carbon black is deep processed through Slag refining equipment .the customer bought our equipment all can safe and relived to produce,and get their Using this equipment ,main would produce water, sound ,slag,waste gas,through our patented products: recycling pool,Sulfur removal system,full automatic slagging system,and The noise static special treatment, all can meet the national discharge standards,no pollution.and our carbon black is deep processed through Slag refining equipment .the customer bought our equipment all can safe and relived to produce,and get their consistent high praise.
1.security:our equipment have anti-blocking device,also have pressure gauges,alarms,safety valves and vacuum equipment
Safety
1) Pressure gauge, alarming device, safe valve.
2) We have anti-clogging device, in case of jam, there will be antomatic alaiming, automatic exhaust and automatic decompression.
3) Using 245R/345R boiler plate or 204/205 stainless. The thickness of part by fire is 14/16/18mm, other parts is 12mm.
4) Automatic welding, processing according to standard of head of pressure vessel.
5) With proprietary vacuum system, it is much safer on condition of negative pressure.
Energy saving
1) Exhaust gas recycle to furnace.
2) Continuous feeding with automatic feeder, no gas leak.
Environmental protection
1) Built-in slagging, seal with water, no solid pollution.
2) With dust removal equipment there is no air pollution
Specification of Equipment
Items | Contents | ||
Raw material | Waste tyres, scrap plastic, waste rubber | ||
Structure form | Horizontal | ||
Model | DT-6T | DT-8T | DT-10T |
Size of reactor | D2200mm*L6000mm | D2600mm*L6600mm | D2800mm*L6000mm |
24-hour capacity | 6 tones | 8 tones | 10 tones |
Operating pressure | Constant pressure | ||
Heating material | Coal, charcoal, fuel gas, fuel oil | ||
Average out-put oil rate | 45%-50% | ||
Material of reactor | Q245R/Q345R boiler plate | ||
Thickness of reactor | 16mm | ||
Rotate speed of reactor | 0.8 turn/minute | ||
Mode of cooling | Water cooling | ||
Power in total | 20 Kw | ||
Life | 5-8 years | ||
|
| ||
1
The whole pyrolysis system is composed by 13 parts, which are reactor, transmission device, catalytic chamber, cooling tube, heavy tank, oil-water separator, condenser, light oil tank, safety device, vacuum system, dedusting system, draft fan, chimney.