Verified Company
Click to enlarge
Hand held rebar tying machine
Usage:
It is used for building market , including civil building, floor pipe, heating floor mesh,steel bar,etc. it can save 3-5tims time than manpower by hand.
Rebar Tire is a hand-held machine used to pack rebars quickly. It is a miniature motor tool has the trait of safety and credibility, reasonable structure, advanced craft, simple and convenient operation,
high efficiency and convenient maintenance.
The product is made up of the main body, wire reel, battery pack, charger, it is inexpensive but useful tool.
Description :
Pliers mouth's largest bound diameter is 39.5 mm and Wire coil wire is 0.8 mm vacuum annealing wire and galvanized wire, Each coil wire length is about 95 meters.
All the binding steps finish inside of the machine with 9.6V safe voltage, which can not cause injury to people.
Technical parameters :
Model | DY-235 | DY-395 | DY-550 | DY-0041 |
Each machine distribution charger number | 1 | 1 | 1 | 1 |
Each machine distribution cell number | 2 | 2 | 2 | 2 |
Every time charging can knot number | 1400 knot | 1400 knot | 1300 knot | 1500 knot |
Each coil wire coil section knot number | 210 knot | 160 knot | 95 knot | 135-150 knot |
Knot consumption wire length | 42-46 cm | 65 cm | 98-102 cm | 15--20 cm |
Wire coil wire Weight | 0.40 kg | 0.40 kg | 0.40 kg | 0.40 kg |
Wire coil wire length | 95 m | 95 m | 95m | 95m |
Wire coil wire diameter | 0.8mm | 0.8mm | 0.8mm | 0.8mm |
Applicable tying rebar scope | 4-28 mm | 8-45 mm | 12-60 mm | 12-68 mm |
Battery charging time | 70 minutes | 70 minutes | 70 minutes | 70 minutes |
The battery model | NI-MH battery | NI-MH battery | NI-MH battery | NI-MH battery |
Size | 295*100*260mm | 295*100*260mm | 295*100*260mm | 295*100*260mm |
Net weight (Kg) | 2.15 | 2.2 | 2.25 | 2.3 |
Gross weight (Kg) | 6.9kg | 7.0kg | 7.1kg | 7.1 kg |