Verified Company
Shenzhen Dicore Technology Co., Ltd.
Click to enlarge
hot melt adhesive heat shrink cable joint sleeve
Description
Heat Shrinkable Cable Repair Sleeve (HSRS-N) is made of a cross-linked, heat-shrinkable, thermally stabilized polyolefin, which is coated with a hot-melt adhesive, it will bond at the temperatures attained during the shrinking operation. The HSRS-N has an aluminum canister providing mechanical protection of joint. Flexible crowns at the ends provide a smooth transition from the joint to the cable.
Features
>Quick and easy installation
>Covered with thermo paint
>Protection against mechanical stress
>Sleeve and channel can be cut to suit shorter applications
>For insulation on low voltage cable up to 1000V
>Hot melt adhesive forms a durable, moisture resistant seal
>Fit a wide range of cable sizes
Technical Data
Property | Test Method | Standard Value |
Tensile strength | ASTM-D-638 | ≥13MPa |
Elongation at break | ASTM -D- 638 | ≥300% |
Tensile strength after aging | ASTM-D-2671/120°C,168hrs | ≥11MPa |
Elongation at break after aging | ASTM-D-2671/120°C,168hrs | ≥210% |
Volume resistance | ASTM-D-2303 | ≥1×1014Ω·cm |
Dielectric strength | IEC 243 | ≥20kV/mm |
Longitudinal shrinkage | - | ≤ 10% |
Eccentricity | ASTM-D-267 | ≤30% |
Water absorption | ISO 62 | ≤0.1% |
Specification
*Alternative for Raychem CRSM,3M HDCW, CANUSA CRDW