heat shrink cable cap for cable end termination
Applications Heat Shrink Cable End Cap is
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
Technical Data
Property | Test Method | Typical Data | Operating temperature | IEC 216 | -55°C to +110°C | Tensile strength | ASTM D 638 | >14 MPa | Elongation at break | ASTM D 638 | > 400% | Density | ASTM D 792 | 1.05 | Elongation at break after aging | 150°C, 168hrs | >300% | Dielectric strength | IEC 243 | >15KV/mm | Volume resistance | IEC 93 | >1014Ω.cm |
|
Specification
Part No. | Inner Diameter | After fully recovered Length ± 10% | After fully recovered Width ± 10% | Cable diameter | As supplied (min) | After fully recovered (max) | Standard length end cap | HSEC-12/ 4 | 12 | 4.0 | 40 | 2.6 | 4-10 | HSEC-14/ 5 | 14 | 5.0 | 45 | 2.2 | 5-12 | HSEC-20/ 6 | 20 | 6.0 | 55 | 2.8 | 6-16 | HSEC-25/ 8.5 | 25 | 8.5 | 68 | 2.8 | 10-20 | HSEC-35/ 16 | 35 | 16.0 | 83 | 3.3 | 17-30 | HSEC-40/ 15 | 40 | 15.0 | 83 | 3.3 | 18-32 | HSEC-55/ 26 | 55 | 26.0 | 103 | 3.5 | 28-48 | HSEC-75/ 36 | 75 | 36.0 | 120 | 4.0 | 45-68 | HSEC-100/ 52 | 100 | 52.0 | 140 | 4.0 | 55-90 | HSEC-120/ 60 | 120 | 60.0 | 150 | 4.0 | 65-110 | HSEC-145/ 60 | 145 | 60.0 | 150 | 4.0 | 70-130 | HSEC-160/ 82 | 160 | 82.0 | 150 | 4.0 | 90-150 | HSEC-200/ 90 | 200 | 90.0 | 160 | 4.2 | 100-180 | Extended length end cap | HSEC-L-14/ 5 | 14 | 5.0 | 55 | 2.2 | 5-12 | HSEC-L-42/15 | 42 | 15.0 | 110 | 3.3 | 18-34 | HSEC-L-55/ 23 | 55 | 23.0 | 140 | 3.8 | 25-48 | HSEC-L-62/ 23 | 62 | 23.0 | 140 | 3.8 | 25-55 | HSEC-L-75/ 32 | 75 | 32.0 | 150 | 4.0 | 40-68 | HSEC-XL-75/ 36 | 75 | 36.0 | 170 | 4.2 | 45-68 | HSEC-L-105/ 45 | 105 | 45.0 | 150 | 4.0 | 50-90 |
End cap with valve is available on request. |
Verified Company
Shenzhen Dicore Technology Co., Ltd.
Click to enlarge