Verified Company
Hebei Langrui Environmental Engineering Co., Ltd.
Click to enlarge
Aluminium fins are formed from a bimetallic tube consisting of a base tube and an
aluminium muff tube. The fins are formed on a cold rolling process from the wall thickness
of the aluminium muff tube. Extruded fin gives very good corrosion protection to the
base tube, as the base tube is not visible to the atmosphere inbetween the fins.
Product Detail:
Tube Detail | Material |
|
OD | ≥16mm | |
THK | 2-8mm | |
Long | 0-12m or as request | |
Fin Detail
| Material | 1060, 6063. |
High | 5-30mm, less than the radius of the base tube. | |
OD | 20-70mm. | |
Pitch | 0-8mm, generally 2.5-5.0mm. | |
Thk | 0.35-0.5mm. | |
Application | Air cooling unit ,Product coolers - gas, Heat exchangers ,chemicals, petrochemicals, oil etc. | |
Helical high finned tubes have been used in the manufacture and repair of air cooled heat exchangers for over
60 years.
Helical high finned tubes have been used in the manufacture and repair of air cooled heat exchangers for over
60 years.
A good quality supply source is imperative for emergency repair and equipment maintenance.
For your rapid quotation please specify:
Number of pieces. Tube: Diameter, thickness, length and material specification. Fin: Type, material, spacing,
thickness, height and unfinned end lengths. Delivery period required.
Extruded Fins
The fin gives complete protection to the base tube and is much stronger than the applied type due to work
hardening of the fin material during the extrusion process.
Upper temperature limit: 350°C
Applied Fins
Are manufactured by wrapping a fin around the base tube to give the required characteristics for the process
application. See types below:
L Fin (or wrapped fin)
The fin is wrapped around the tube and secured at each end. Gives some surface protection to the tube.
Used for moderate temperature cooling applications.
Upper temperature limit: 120°C
LL Fin (or Overlapped Fin)
The fin is wrapped around the tube with an overlapping foot and secured at each end. Gives good surface
protection to the tube. Used for moderate temperature cooling applications.
Upper temperature Limit: 180°C
G Fin Tube (or Embedded Fin)
Fin is embedded into the outer wall of the tube, but gives no surface protection. In general use for continuous
process applications; ie refineries, petrochemical, fertilizer and gas plants.
Upper temperature limit: 450°C
KL Fin (or Knurled L fin)
The fin is wrapped around the tube and the foot is rolled into the outer surface of the pre knurled tube and
secured at each end. Gives good surface protection to the tube and improved heat transfer compared to the
L or LL type fin. Used for moderate temperature cool applications.
Upper Temperature limit: 250°C
Real product show
The machine is working