Verified Company
Zibo Bainaisi Chemicals Co., Ltd.
Click to enlarge
Zibo Bainaisi Chemical Co., Ltd
Zhongxin Street,Huantai County,Zibo City,Shandong Province
Tel:0086-533-8226773 Fax:0086-533-8226773
PTFE Molding Powder(MICRONIZED PARTICLE) DF-16
No. | Item | DF-16 | |
Grade A | Qualified | ||
1 | Smoothness & Cleaness | White sheet surface, even texture, no residue quantity (≤0.5mm)≤2 | |
2 | Tensile Strength,(Mpa) | 29 | 27.4 |
3 | Elong At Rupture(%)≥ | 300 | 280 |
4 | Volume Density,(g/L) | 300-450 | |
5 | Residue on sieve (65 μ m)(%)≤ | 3 | |
6 | Moisture Content.(%)≤ | 0.04 | |
7 | Melting Point(°C) | 372±5 | |
8 | Stand Relative Density | 2.130-2.160 | |
9 | Thermal Inst, Index ≤ | 20 | |
10 | Electric Strength(KV/MM)≥100 | 60 | |
11 | For check | Execute according to requirement of HG/T2903-1997 | |
12 | For process | For Molding | |
13 | usage | The resin are mainly used as the general required electric source, which is suitable for making film, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop ,filling compounds. etc. | |
14 | Packing, Storage Transportation | 1.PTFE is packed in double layer PVC bags inside and in hard circular barrels outside, on the barrels, there should be attached label and quality certificate, on which there are brand, trademark, executive criterion. type, grade, lot NO. and net content, pack date, checker, packager. 2.PTFE should be stored in clean dry warehouse to prevent from dust, moisture, foreign matters etc. 3.The products are transported according to non-dangerous products, Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together. | |
PTFE Molding POWDER (MICRONIZED PARTICLE)DF -17
Item | DF-17 | ||
Grade A | Qualified | ||
1 | Smoothness & Cleaness | Clean and white surface, even texture, total impurity quantity ≤6.impurity quantity(0.5mm-2mm)≤2 impurity quantity(2mm-3mm)≤1 | |
2 | Tensile Strength,(Mpa)≥ | 29 | 27.4 |
3 | Elong. At Rupture(%)≥ | 300 | 280 |
4 | Volume Density,(g/L) | 300-450 | |
5 | Residue on sieve(65 μ m)(%)≤ | 3 | |
6 | Moisture Content.(%)≤ | 0.04 | |
7 | Melting Point(°C | 372±5 | |
8 | Stand Relative Density | 2.130-2.160 | |
9 | Thermal Inst, Index ≤ | 20 | |
10 | For check | Execute according to requirement of HG/T2903-1997 | |
11 | For process | For Molding | |
12 | usage | The resin are mainly used as packing products resource and packing pelletized resource, which can be processed to film, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal,ring, and loop etc. | |
13 | Packing, Storage Transportation | 1. PTFE is packed in double layer PVC bags inside and in hard circular barrels outside, on the barrel, there should be attached label and quality certificate, on which there are brand, trademark, executive criterion. type, grade, lot NO. and net content, pack date, checker, packager. 2. PTFE should be stored in clean dry warehouse to prevent from dust, moisture, foreign matters etc. 3. The products are transported according to non-dangerous products, Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together. | |