Click to enlarge
Tensioner Pulley Bearing
F-121977.1 For Peugeot and BWM
Tensioner Function,It is rotated with a peanut hole as the central figure;
- 1. Easy install of timing belt
- 2. Set up initial belt tension with tension spring force
- 3. It keeps up belt tension after installing on engine
- 4. Reduce belt span vibration as supporting belt
Reference other tensioner pulley bearing series is avaiable for reference:
Idler Bearing;
Idler Function
Most of case, It locates tight (right) side;
1. Increase belt wrap angle of cam pulley and crankpulley
2. Reduce belt span vibration as supporting belt
3. It keeps up belt tension after installing on engineldler could be added or removed according to engine layout
This bearing is located in the front of an internal combustion engine. It provides tension to the belt which drives from the crankshaft, to the cam shaft, alternator, air compressor, power steering pump, and water pump. It must handle high temperatures, high-speed rotation, and belt vibration because of contiguity in the engine used in order to make the direction of a belt change. These bearings are designed against different specification from normal deep groove bearings. These bearing are divided roughly into two types and identified by the usage, respectively.
Sealed groove bearing is usually used and it also has built-in heat-resistant grease, a seal, and retainer and the structure can withstand a temperature change or change of belt tension when the car is running.
1)Tensioner bearing
The rotation center is movable in order to give tension to the belt.
2) Idler Bearing
Unitized with the pulley.
Some crossing reference item no for list:
SKF NO | NTN | NSK | |||
VKM12380 | VKM33002 | VKM75006 | VKM81004 | JPU60-71+JF129 | 57TB0505B01 |
VKM12151 | VKM71000 | VKM75008 | VKM81100 | JPU60-283+JF485 | 62TB0813B01 |
VKM11010 | VKM71401 | VKM75033 | VKM81200 | JPU60-216+JF391 | 50TB0526B01 |
VKM13244 | VKM24212 | VKM75044 | VKM81201 | JPU60-257 | 62TB0520B01 |
VKM13100 | VKM33004 | VKM75100 | VKM84000 | JPU57-54+JF574 | 50TB0101 |
VKM13201 | VKM33017 | VKM75101 | VKM84201 | JPU60-215 | 62TB0629B06 |
VKM13240 | VKM38001 | VKM12001 | VKM84600 | JPU55-54 | 62TB0629B04 |
VKM13200 | VKM38004 | VKM12010 | VKM84601 | JPU55-002B-1 | 62TB0103 |
Each Despatch of the goods will be checked in our warehouse if LCL before delivery to the forwarder;
If the FCL, we will supervise the container by our professional staff until to seal in the container
To secure all the goods in the right position before shipping.
- We visited more professional Industry Bearing and Auto parts exhibition in ShangHai,BeiJing, HK, Dubai, Germany, Italy, Poland, Russia.USA. Mexico, Brazil.
Introduction of our Corp:
NingBo CIE Corp was established 1991. is China Top 500 enterprises and China Export top 100
Enterprises and is a comprehensive enterprise group talking import and export trade as main business. Mainly operates the 6 types of Products such as automobile parts, steering gearbox parts, auto hub bearing, clutch release bearing, ball bearing ,tapered roller bearing, cylinder roller bearing, needle roller bearing, special non standard bearing, hardware wedge anchor, fastners, Linear guide rail and ball screw, solid shaft,Plumbing pipes, Sanitaryware, electrical home appliance, Textile and garment and Light Industry technology
Under the company there are over 20 subsidiaries .2 Comprehensive Industrial Parks and Over 10 production enterprises.The company has domestic branches in the places such as ShangHai, NingBo,Hangzhou,etc and has oversea office or production enterprises in the places such as America, Hong kong, Russia and Vietnam, etc.
No:1) Our Honors as follows:
No 2). Effective managing system:
l ISO9001,ISO14001 and OHSAS18001: integrating administrative system and environmental Management systemapproved;
l ERP administrative system integrally,
No 3). CIE Corp’s Group Team and Culture:
l Honesty, Create Customer’s Value, Open and Active;
l Offer the Right Part, Right Product, Right Quality and Right Delivery;
No.4) FAQ:
l Quotation
1).Find our item no in our e-catalogu or website or even with crossing reference item no from other company;
2).we will make a quotation sheet in coming 24 days;
3). If you can offer us inquiry order quantity and quality ,so that we can quote you the right price on FOB and delivery time for approval samples and bulk production..
4). OEM and ODM order. Kindly offer us a first drawing or factual sample even with testing parts for approve.
l Packaging
1). If no speacial request,we will use regular packaging for safety transportation by sea,by air, by train.
2).If need special packing or carding, please list them in your E-mail.We would like to make the customer packing
3).As a rule. All Carton will be packaged in Ply wooden Pallet or Case in order to avoid fumigation certificate
Except other stipulated with customers;
l Sample&Delivery:
1).Normally Sample should be free of charge. Yet the express freight will be incur by customer at first time;
2) If quantity is not very big,we will send you by UPS,DHL,FEDEX,OR EMS. Thracking number will be advised after delivery,
3).Sample order could be ready in 2-3 days after approve, Regular official order item no could be deliveryed normally in 30 days;
Any Other inquiry on bearing, steering parts and hardware anchor fasterner, we can offer you a good solution